Threaded Rods And Eye Bolts Development Analysis

       Hexagon Flange Bolt is a kind of mechanical parts that are used for fastening and connection and are extremely widely used. All kinds of fasteners can be seen on all kinds of machinery, equipment, vehicles, ships, railways, bridges, buildings, structures, tools, instruments, meters and supplies. With my country's accession to the WTO in 2001, it has entered the ranks of major international trading nations. my country's fastener products are exported to various countries in the world, and fastener products from all over the world are also pouring into the Chinese market.
At present, my country has exported fasteners to more than 50 countries (regions), of which the European Union, the United States and Australia are relatively large. The top six export countries and regions are the United States, Germany and Japan. Third, the United Kingdom is fourth, Italy is fifth, and Hong Kong is sixth. The sum of exports to the United States, Germany and Japan accounts for more than one-third of the total exports. In 2007, my country exported 2.57 million tons of fasteners, accounting for 48.95% of that year's output.
   In 2010, the demand for fasteners in the United States, Western Europe, and Asia was $16.6 billion, $14 billion, and $19.2 billion, respectively. The demand for fastener products is divided by thread. External threaded products account for about 52% of the total demand; internal threaded products account for about 19% of the total demand; threaded products account for about 18% of the total demand; special according to user requirements Parts and assemblies account for about 7% of the total demand; aerospace and other special fasteners account for about 4% of the total demand.  
my country is a major fastener manufacturer. There are more than 7,000 large and small fastener companies in the country. In 2007, the output of fasteners reached 5.25 million tons, accounting for more than a quarter of the global fastener production. It has been ranking top in the world for many consecutive years, but most of the fasteners produced in my country are low-strength, low-grade products, of which ordinary low-grade standard fasteners below 8.8 account for about 45%-50%. 
However, competition in the fastener market in my country has become more and more fierce as time goes by. Many foreign companies continue to enter my country’s market and take root in my country, using my country’s cheap labor to produce their branded products to obtain higher profits. . Under this pressure, how to keep their products from being suppressed and to develop better and better has become a big problem for many companies. 
The lack of major brands in China is also a problem that needs to be dealt with by companies. So many companies have poured into the Chinese market from foreign countries, which means that more fastener companies need to constantly break through themselves, and gradually become a company capable of international Market-integrated enterprises. Such pressure is very helpful to the development of our fasteners. 
Compared with foreign-funded enterprises, many fasteners in our country are mainly lacking big brands. This makes us less competitive in the fastener market. Therefore, our country has adopted the familiar price war, but because it is in China Fastener market. Therefore, the price war does not have much advantage for Chinese enterprises. The better way for my country is to build a large brand of high-strength screws, have its own creativity, and be able to integrate with international fasteners, so that the competition in the market will be better. Will appear more powerful. 
   As long as we can build a system and policy environment conducive to innovation and entrepreneurship through reforms, we will be able to significantly improve the technical level and value-added level of China's fasteners in a not too long period of time. At present, the world’s advanced fasteners are facing major or minor technological breakthroughs. If Chinese fasteners can seize this great opportunity, give play to their advantages, and develop some internationally competitive fist products, it is also Completely possible
        In recent years, with the rapid development of my country's mold industry, the standardization, specialization and commercialization of mold parts have reached a relatively high level, and significant progress has also been made. However, those personalized products with high technical content, advanced structure, excellent performance, high quality, and convenient replacement are still lacking. Therefore, it is still necessary to import a considerable number of fastener molds from abroad every year, and domestic fastener molds should develop and make breakthroughs in terms of technical standards, scientific and technological development, and product quality.
       Most industrially developed countries pay more attention to the development of fasteners. Of course, they cannot do without the standard fastener molds. However, due to the late start of mold standardization in my country, the current fastener molds in my country have long been characterized by small varieties and specifications, small production scales, poor circulation, many medium and low-end products, and few medium and high-end products. The high-end fastener molds produced by some foreign-funded enterprises are expensive and affect their promotion and application. For my country's fastener mold companies, there is too little concentration, too many factories and too scattered, and product quality cannot keep up; for the fastener mold market, disorderly competition is the chaotic market.
      According to the development plan of China's "Tenth Five-Year Plan" mold industry: fastener molds should expand their varieties, improve accuracy, and achieve interchange. Up to the present "Twelfth Five-Year Plan", the development of fastener molds in our country still cannot keep up with the level of developed countries. Many fastener molds have been used abroad for many years, but China's Threaded Rods And Eye Bolts companies have not yet produced them. At present, medium and high-grade fasteners are basically imported from abroad, and the products produced and used by ourselves are products with lower performance and poor stability, which are used in molds with less demanding requirements.